Buying Guides

How to Choose the Right Tricone Drill Bit for Your Formation

A practical guide to selecting tricone drill bits by IADC code, tooth type, bearing structure and thread connection - covering soft, medium and hard formations for oil & gas, water well and mining dri

photo-1518005020951-eccb494ad742

Why the IADC Code Matters

Every tricone bit is built for a specific range of formations, and the IADC (International Association of Drilling Contractors) code tells you exactly what a bit is designed for. Reading the four-digit IADC code is the fastest way to narrow down hundreds of options to the few bits that will actually perform on your rig.
The first digit groups bits into a formation hardness series from 1 (very soft) to 8 (extremely hard). The second digit refines that hardness range. The third digit describes the bearing and gauge design, and for TCI bits the fourth digit is replaced by a letter indicating insert shape and additional features.

Step 1: Match Tooth Type to Your Formation

Milled tooth bits use long, chisel-shaped steel teeth and cut by gouging and scraping. They are economical and fast in soft to medium formations such as clay, shale, gypsum and soft limestone.
TCI (tungsten carbide insert) bits use pressed-in carbide inserts instead of steel teeth. They resist abrasion and compression far better, which makes them the default choice for medium-hard to hard rock: dolomite, granite, chert, hard sandstone and abrasive formations. Running a milled tooth bit in hard abrasive rock will wear the teeth flat within hours; running a TCI bit in soft clay wastes money without gaining life.

Step 2: Check Bearing and Seal Structure

Open bearing bits are the most economical option for short runs and shallow wells. Roller bearing bits with metal seals offer a better balance of cost and life, while journal bearing bits with elastomer seals deliver the longest bit life in demanding oilfield applications. For deep wells or long sections, always spec sealed journal bearings.

Step 3: Confirm Size and Thread Connection

Tricone bits are ordered by hole diameter and pin thread. Common sizes run from 3 7/8 inch to 26 inch, with API 2 3/8, 3 1/2, 4 1/2, 6 5/8 and 7 5/8 regular pin threads. Confirm the rotary table or top drive connection before ordering, because the wrong thread is the most common - and most avoidable - delivery delay.

Quick Selection Checklist

  • Identify the main formation and the hardest stringers you expect to drill
  • Convert that formation to an IADC series (1-3 soft, 4-6 medium, 7-8 hard)
  • Choose milled tooth for speed in soft rock, TCI for life in hard rock
  • Select sealed journal bearings for deep or long-interval drilling
  • Match bit diameter and API pin thread to your existing BHA
If you are not sure which IADC code fits your project, send us your formation description, hole size and drilling parameters - our engineers will recommend the right bit and quote within 24 hours.

Read next

More from the journal

Keep readers moving through related announcements, stories, and field notes.